Raised Bed

Raised Beds
Easy to assemble

These Raised Beds have three distinct advantages. Constructed from solid, pressure treated timber, flat packed' for storage and very easy to construct and dismantle.
Raised Bed : Components	Large Raised Bed : Components
6 x 1.25 Boards 6 x 1.8 Boards 6 x 300mm x 75 x 75 Blocks 30 x Coach Screws Tools required - 10mm Spanner	6 x 2.4 Boards 6 x 1.8 Boards 8 x 300mm x 75 x 75 Blocks 36 x Screws Tools required - Cross Head Screwdriver

Step 1 - Layout 3 Blocks.
Place one of the longer Boards on top, check centre block is equal distance from each end and that the blocks are at right angles. Boards are placed with the angle cut facing down. Screw board to blocks.

Step 2 - Repeat process for all three boards to construct one side - then repeat for the other long side.

Step 3 - For the two shorter sides the block is placed in the centre : prop ends temporarily whilst fixing centre block

Step 4 -Screw the two completed longer lengths to the completed shorter lengths by drilling pilot holes and screwing into corner blocks.

Finished - You may need to retighten the screws during a hot summer.

Fountain Timber Products can take no responsibility for the advice offered on this page. Before starting any DIY / Gardening project make yourself
aware of the 'Health & Safety' issues - if in doubt seek professional assistance.