Get in touch

Security Shed

Security Shed Door.jpg
SVW-15-Year-warranty-logo-300x300.jpg
Security Shed Door.jpg
SVW-15-Year-warranty-logo-300x300.jpg
 

Security Shed

Security Shed is designed to keep your garden items protected from “unwanted guests”. Produced using Ex 19mm pressure treated shiplap, with the roof and floor sections made using Ex 25mm pressure treated tongue & groove for strength and durability it also features continuous hinge over the full length of the door, a high quality 6 pin barrel throw lock mechanism (supplied with 5 spare keys) and a narrow Perspex window to provide maximum security. Dimensions: 2100mmH x 1825mm W x 2430mmD

Garden Sheds are a practical solution to all your storage needs. All our sheds are manufactured from joinery grade Scandinavian redwood and pressure treated to protect against wood decay and insect attack for long-term durability.

All our sheds are constructed using 50 x 38mm *nominal size framework, clad with 19mm *nominal size shiplap, the roof & floor are machined from 25mm *nominal size tongue & groove timber. This allows us to produce a high-quality robust shed which when coupled with our 15-year Treat-Right Warranty ensures a long service life. When siting the shed, only bearers treated to Use Class 4 (in ground contact) can be used. If the shed is positioned directly onto a concrete base, then this must have drainage to avoid standing water.

*Nominal sizes of softwood shown are before the material has been profiled to section.

WATER REPELLENCY – PRESSURE TREATED TIMBERS FOR SHEDS, GARDEN BUILDINGS AND ANIMAL HOUSING

Pressure preservative treatment is designed to prevent wood decay and insect attack to give softwood construction and landscaping timber products an extended and low maintenance service life. The treatment is not intended to perform as a waterproofing agent.

When using pressure treated cladding timbers in the construction of sheds or garden buildings the following guidelines should be followed to help prevent any water ingress.

1. The Timber Research and Development Association (TRADA) recommends a 16-19mm nominal thickness for cladding timbers.

2. Nail heads should only be driven marginally below the surface of the cladding timbers.

3. A suitable airflow should be allowed throughout the structure to assist on-going drying.

4. The dry, external timbers will need ingress protection added through the application of an appropriate and well maintained water repellent coating, which should be applied to the dry external timbers following the relevant manufacturer’s guidelines. 

Loading... Updating page...